RX200

Dual-Channel ENG Receiver

RX200_Front_Angled-fit-S
RX200_SideView-S
RX200_Rear-S
 Firmware | Manual

For all cameras without receiver slot

The RX200 is a 200 MHz wide compact battery powered ENG receiver. It has a tunable tracking front end filter for receiving any frequency in any block from 20 through 27, or 512 – 698 MHz, while still filtering out unwanted RF.

RX200 can output AES digital audio or analog audio at -35dB mic level, -10dB consumer level, or 0dB line level on a single TA5 connector. It’s is also capable of receiving and outputting the embedded SMPTE time code on a BNC connector also on mic, line or consumer levels.

The RX200 / TRX900CL Camera Link combo is a great solution for sending two channels of 100% digital audio with embedded SMPTE timecode from bag to camera. Small and light-weight with Zaxcom’s patented side-mounted LED’s, the RX200 is easy to mount on any camera – from small format DSLR to a full size ENG rig. RX200 has an automatic tracking front end filter so you can receive on any frequency in any block from 20 through 27 (512-698MHz) with impressive range. The ultra compact unit isn’t only small, but powers itself on 4 internal AA batteries for up to 12 hours for use with any camera big or small

Digital Modulation
Encrypted Audio
Technical Details
RECEIVER
Receiver RF Channels: 1
Diversity method: antenna switching
RF Modulation: proprietary digital method
RF Frequency Range: 518 to 698 MHz
RF Frequency Step: 100 KHz
RF Signal Bandwidth: 200 KHz
Channel Separation: 500 KHz (700 KHz recommended)
Sensitivity: -114 dBm
Antenna Connector: 50-ohm SMA female X 2
RECEIVER AUDIO – ANALOG OUTPUT X 2
Dynamic Range: 116 dB
Distortion: 0.002%
Frequency Range: 20Hz to 16kHz
DAC Bit-depth: 24 bits
Connector: TA-5M
Audio Output: Active analog balanced
Audio Output Level: -35dBm (mic), -10dBm (consumer) or 0dBm (line)
RECEIVER AUDIO – DIGITAL OUTPUT
Signal Format: AES Balanced
AES dynamic range: 123dB
Frequency Range: 20Hz to 16kHz
AES output: AES3 balanced at 96KHz
Audio Output Connector: TA-5M
TIMECODE
Timecode output connector: BNC
Timecode output level: .01VPP, .2VPP, .5VVP, .9VPP, 1.5VPP
Time code output rate: 23.98, 24, 25, 29.97 ND, 29.97 DF, 30
POWER
External Power: 6 to 18 VDC (140mA @ 12VDC)
Power Connector: Switchcraft 760k
Internal Power: 4 AA Batteries
Li-Ion Battery Life: Up to 12 hours
NiMH Battery Life: Up to 8.5 hours
Alkaline Battery life: Up to 7 hours
MISC.
Serial Control Port: RS422
Weight: 7.7 oz (without internal batteries)
Dimensions: 1.0? x 3.5? x 3.5? (25mm x 89mm x 89mm)
Display: Graphic White OLED Panel