Need Expert Advice? Call us: +49 (0) 89 360 55 10-0
B2B Shop for Commercial Customers
B2B Shop for Commercial Customers

Sound Devices

HX-3 - Stereo Headphone Amplifier

Portable headphone distribution amplifier

  • Battery-powered
€611.00

Prices plus VAT

Delivery time about 5-8 Workdays

Quantity:

  • A09858

Features

Small, useful headphone distribution amplifier with battery operation for looping into the signal path.

The compact HX-3 headphone distribution amplifier is the perfect accessory to quickly provide three high-performance stereo headphone feeds with individual level controls from line-level sources.

The HX-3 can produce very high headphone levels with extremely low noise and distortion.

Great for Radio, TV, Film, and Music Productions

The HX-3 accepts balanced XLR line-level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs. Its 1/4-inch loop-out can connect multiple HX-3’s for additional headphone outputs. Headphones are connected to panel-mounted 1/4-inch stereo connectors.

The HX-3 has a durable aluminum chassis to withstand the punishment of field and studio environments. The unit is powered by inexpensive batteries (two-AA) or external 5-18 VDC.

Small, useful headphone distribution amplifier with battery operation for looping into the signal path.

The compact HX-3 headphone distribution amplifier is the perfect accessory to quickly provide three high-performance stereo headphone feeds with individual level controls from line-level sources.

The HX-3 can produce very high headphone levels with extremely low noise and distortion.

Great for Radio, TV, Film, and Music Productions

The HX-3 accepts balanced XLR line-level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs. Its 1/4-inch loop-out can connect multiple HX-3’s for additional headphone outputs. Headphones are connected to panel-mounted 1/4-inch stereo connectors.

The HX-3 has a durable aluminum chassis to withstand the punishment of field and studio environments. The unit is powered by inexpensive batteries (two-AA) or external 5-18 VDC.

  • Frequency Response: 10 Hz - 50 kHz, -±1.0 dB, any input to any output, gain controls set to 50%
  • Voltage Gain: 34 dB from balanced line to headphone output, 35 dB from headphone input to headphone output
  • Output Clipping Level: +18 dBu minimum with 600 ohm load, +16 dBu minimum with 300 ohm load
  • Headphone Output Impedance: 200 ohms
  • Input Clipping Level: XLR: +24 dBu minimum; 1/4-inch and 1/8-inch inputs: +22 dBu minimum
  • Dynamic Range (balanced line inputs): 120 dB minimum
  • THD + Noise: 0.03% maximum (from 10 Hz to 22 kHz @ +10 dBu input and output level, 300 ohm load, 10 Hz - 22 kHz filter bandwidth)
  • Inputs: XLR: electronically balanced, 22k ohm input impedance, 1/4-inch unbalanced: 9.1k ohm impedance; 1/8-inch unbalanced: 9.1k ohm impedance.
  • Internal Voltage Rails: ±15 V, regulated
  • Power Source: Internal: 2 AA alkaline batteries, 18 hours life typical with nominal levels. External: 5 - 17 VDC via threaded coaxial connector (5.5 mm outer diameter, 2.1 mm inner diameter), pin positive, sleeve negative.
  • Power LED: Green indicates power and good battery. Red indicates power with low batteries. LED turns red when ~ 4 hours of battery life remain.
  • Operating Temperature Range: 0 to 70 degrees C; 32 to 160 degrees F
  • Dimensions: 43 mm x 94 mm x 140 mm (h x w x d) (1.7" x 3.7" x 5.5")
  • Weight (unit only): 0.56 kg; 1.24 lbs
  • Included Accessories: 1/4-inch to 1/8-inch trs interconnect cable, rubber feet (4), locking DC jack
  • HX-3 Headphone Amplifier
  • Headphone adapter cable (1⁄4 inch to 1⁄8 inch)
  • Coaxial female power connector
  • 4 Adhesive rubber “bumpers”
END OF tabs.tpl
Viewed