Need Expert Advice? Call us: +49 (0) 89 360 55 10-0
B2B Shop for Commercial Customers
B2B Shop for Commercial Customers

Zaxcom

RX-12R - Chassis for 6 Receiver Modules

Chassis for receiver modules

  • For use in racks
  • 1 HE, 6 slots
  • Compatible with QRX212, MRX214 and MRX414 modules
€3,350.00

Prices plus VAT

Quantity:

  • A09521

Features

Intelligent Design

The RX-12R is a completely reimagined rack-mountable receiver ideal for sound challenges in studio and network applications. Its ergonomic design takes up only one-and-a-half rack spaces in height.

Powerful Reception

As a wide-band receiver, its full tuning range is 512-698 MHz and features a 35 MHz tracking front end filter to eliminate interference from unwanted radio frequency (RF). The RX-12R provides RF amplification and both antenna and power distribution for up to 6 Zaxcom QRX212 modules inside the RX-12R. Placing the QRX212 module in single-channel mode will deliver 6 channels of true diversity audio and dual-channel mode allows for up to 12 channels of audio when demand is less critical. All QRX212 modules are hot-swappable and can be added or removed at any time, making the RX-12R ideal for rental companies where receiver requirements can change on a daily basis.

Fully Digital

The RX-12R receives a 100% digital signal that is fully encrypted resulting in audio quality far superior to any analog system. Additionally, it’s compatible with all Zaxcom modulations and transmitters.

Easy Control

A bright, full-color LCD displays the menu while a built-in frequency scanner and Auto-Pick software eliminates the guesswork and can coordinate and choose the best frequencies with a push of a button.

Connectivity

6 XLR analog outputs and two DB25 connectors configure 12 analog or 12 digital signals. An antenna in and RF loop through provide support to daisy chain up to three RX-12R receivers to one set of antennas. You can monitor the internal audio via headphones and auto-switching 12V redundant DC input supplies power.

Advanced Features

When paired with a Zaxcom recorder, the RX-12R can re-frequency transmitters to match the RX-12R with a touch of a button via ZaxNet™.

Intelligent Design

The RX-12R is a completely reimagined rack-mountable receiver ideal for sound challenges in studio and network applications. Its ergonomic design takes up only one-and-a-half rack spaces in height.

Powerful Reception

As a wide-band receiver, its full tuning range is 512-698 MHz and features a 35 MHz tracking front end filter to eliminate interference from unwanted radio frequency (RF). The RX-12R provides RF amplification and both antenna and power distribution for up to 6 Zaxcom QRX212 modules inside the RX-12R. Placing the QRX212 module in single-channel mode will deliver 6 channels of true diversity audio and dual-channel mode allows for up to 12 channels of audio when demand is less critical. All QRX212 modules are hot-swappable and can be added or removed at any time, making the RX-12R ideal for rental companies where receiver requirements can change on a daily basis.

Fully Digital

The RX-12R receives a 100% digital signal that is fully encrypted resulting in audio quality far superior to any analog system. Additionally, it’s compatible with all Zaxcom modulations and transmitters.

Easy Control

A bright, full-color LCD displays the menu while a built-in frequency scanner and Auto-Pick software eliminates the guesswork and can coordinate and choose the best frequencies with a push of a button.

Connectivity

6 XLR analog outputs and two DB25 connectors configure 12 analog or 12 digital signals. An antenna in and RF loop through provide support to daisy chain up to three RX-12R receivers to one set of antennas. You can monitor the internal audio via headphones and auto-switching 12V redundant DC input supplies power.

Advanced Features

When paired with a Zaxcom recorder, the RX-12R can re-frequency transmitters to match the RX-12R with a touch of a button via ZaxNet™.

Output

  • Analog Audio Output: Balanced 0dB @ -20 dBFS (2-channel receiver)
  • Analog Audio Output Connectors: 6 x Male XLR Outputs
  • Digital Audio Output Connectors: 2 x DB25
  • Headphone Output: 1 x 3.5 mm

Digital I/O

  • Connectors 1 x USB / 1 x RS422

Receiver

  • RF Input Connectors: 2 BNC
  • RF Output Connectors: 2 BNC
  • RF Impedance: 50 ohm
  • RF Gain Input / Output: 0 dB
  • RF Amp Noise Figure: .5 dB
  • RF Amp IP3: +30 dB input
  • RF Filter Band Pass: 35 MHz
  • RF Tuning Range: 512 – 698 MHz

MRX414 Module

  • Receivers Per Module: 4
  • Receiver Modulation: Zaxcom Proprietary Digital
  • MRX414-L Tuning Range: 512 – 614 MHz
  • MRX414-M Tuning Range: 536 – 652 MHz
  • MRX414-H Tuning Range: 596 – 698 MHz
  • Power Consumption: 300 ma @ 12 VDC
  • Size (L x W x H): 5" x 3" x .8" (12.7cm x 7.6cm x 2cm)
  • Weight: 7oz (198g)

MRX214 Module

  • Receivers Per Module: 2
  • Receiver Modulation: Zaxcom Proprietary Digital
  • MRX214-L Tuning Range: 512 – 614 MHz
  • MRX214-M Tuning Range: 536 – 652 MHz
  • MRX214-H Tuning Range: 596 – 698 MHz
  • Power Consumption: 160 mA @ 13 VDC
  • Size (L x W x H): 5" x 3" x .8" (12.7cm x 7.6cm x 2cm)
  • Weight 7oz (198g)

QRX212 Module

  • Receivers Per Module: 2
  • Receiver Modulation: Zaxcom Proprietary Digital
  • Tuning Range: 512 – 698 MHz
  • Power Consumption: 300 ma @ 12 VDC
  • Size (L x W x H): 5" x 3" x .8" (12.7cm x 7.6cm x 2cm)

Misc

  • IFB200 Interface: Switchcraft TA5-M
  • Power: 8 VDC to 18 VDC (2 amps w/6 x QRX212 modules)
  • Power Type: Dual input auto switching
  • Power Connectors: 2 x Hirose HR10A-7P-4P
  • LCD Screen: TFT daylight readable color
  • LCD Size: 2.2" diagonal (5.6cm)
  • Size (L x W X H): 19" x 10.2" x 2.325" (48.3cm x 3.0cm x 5.9cm)
  • Weight: 7.6 lbs (3,5kg) (loaded w/ 6 x QRX212 receiver modules)
END OF tabs.tpl
Viewed