CCM 4V - Ambient

SCHOEPS Compact Microphone

Audio Samples | Manual

“Vertical” (side-addressed) cardioid capsule

For a very wide range of recording applications

Slight high-frequency emphasis

Often preferred for singing or speaking voices and most instruments

The CCM 4V may be easier to use in near-coincident setups than the CCM 4:
the microphone bodies do not get in each other’s way.

Application

The MK 4V was created in answer to requests for a cardioid with its main axis along the side. In addition to its usefulness in the concert hall, this microphone type is of particular value in speech recording, since its slight emphasis around 10 kHz helps to improve intelligibility.

The directional response is especially well maintained even at higher frequencies, due to the acoustically transparent housing. There is less high-frequency emphasis of off-axis sound than occurs with most small, axial-response cardioids. The MK 4V still sounds somewhat brigher than the MK 4, however, because of its overall frequency response.

Graphics

Frequency response and polar diagram MK 4V + CMC 6 and CCM 4V

Technical Details
Current consumption with 12 V	8 mA
Current consumption with 48 V	4 mA
Impedance	90 Ω
Minimum recommended load impedance	600 Ω
Low-cut frequency	20 Hz
Length (L version)	without connector: 46 - 58 mm
Length (U version)	46 - 58 mm
Diameter	20 mm
Weight (U-version)	33 g

Weight (L-version)	43 g
Surface finish	matte gray
Frequency range	40 Hz - 20 kHz
Sensitivity	13 mV/Pa
Equivalent noise level (A-weighted)	14 dB-A
Equivalent noise level (CCIR)	24 dB
Signal-to-noise ratio (A-weighted)	80 dB-A
Maximum sound pressure level at 0.5% THD	132 dB-SPL

Kaufanfrage Sales Inquiry