Digital Audio Output Adapter
Technical Data
The Lectrosonics SRAES3 bottom plate adapter for all SR Series dual-channel slot receivers is now in stock! The SRAES3 will work with all SR receiver versions to provide audio in the following formats: AES3 digital audio at 48 kHz sampling with an internal clock
AES3 digital audio with an external word clock at 44.1, 48 or 96 kHz sampling; and balanced analog audio from -50 dBu to +5dBu in 1 dB steps. One or two channels of digital audio are delivered from the CH1 jack, while the CH2 jack delivers analog audio at all times.
Digital output for trouble-free low-noise audio
The SRAES3 will work with all SR dual slot receivers to provide audio in the following formats:
AES3 digital audio at 48 kHz sampling with an internal clock
AES3 digital audio with an external word clock at 44.1, 48 or 96 kHz sampling
Balanced analog audio from -50 dBu to +5dBu in 1 dB steps.
One or two channels of digital audio are delivered from the CH1 jack, while the CH2 jack delivers analog audio at all times.
The standard multi-pin interface and mounting holes are the same on all SR Series receiver output adapters. External word clock can be fed to the SRAES3 via the BNC connector. A 75 ohm termination of the word clock connection is applied by a field changeable jumper, installed by default at the factory. The housing is machined from a solid aluminum billet and hard anodized for ruggedness.
Technische Details |
---|
Digital Output |
Type: AES3/EBU |
Output Level: -11 dBFS |
Internal Clock Sample Rate: 48 kHz |
External Clock Sample Rate: 44.1, 48 or 96 kHz |
THD: 0.15% |
Output Connectors: TA3 male (mini XLR) |
Word Clock Input |
Parameter: Standard TTL level |
Termination: 75 ohm (removable) |
Connector: BNC |
Analog Output |
Type: Balanced |
Output Level: -50 to +5 dBu in 1 dB steps |
THD: 0.15% |
Power Requirements: (with SRc receiver) 7 min. to 18 max. VDC; 345 mA at 7 VDC; ¥ 200 mA at 12 VDC; ¥ 135 mA at 18VDC |