MixPre II Serie

Vielseitig. Belastbar. Leistungsstark.

MixPre-II-inAction3-S
all_mixpre_ii_stack-S
MixPre-II-inAction1-S
MixPre-II-inAction2-S

Ob für Field-Recording, Soundeffekte, Filmton, Podcasts, Voice-Over, Musikaufnahmen oder für erste Versuche im Bereich Tonaufnahme: die MixPre II-Serie macht es dir leicht! Mit der USB-Schnittstelle dieser leistungsstarken Audiorekorder kannst du Ton ganz easy für verschiedenste Anwendungen aufnehmen.

Die neue MixPre-Generation

Die neue Generation der preisgekrönten MixPre-Serie bringt eine höhere Leistung und einen Dynamikumfang von satten 142 dB. Wie ihre Vorgänger kommen die MixPre II-Geräte mit handgefertigten, kristallklaren und rauscharmen Kashmir-Vorverstärkern – für Aufnahmen in hervorragender Qualität bis zu einer Float-Bittiefe von 32 Bit und einer Abtastrate von 192 kHz.

Für dich gemacht

Der MixPre II passt sich deinen Bedürfnissen an. Nimm intern auf einer kompatiblen SD-Karte am Gerät auf oder übertrage über USB zu deinem Computer. Den nötigen Strom besorgen sich die MixPre II-Rekorder direkt über Computer oder Netzteil. Und wenn du mal mitten in der Pampa aufnimmst, kannst du dich auf die AA- oder Sony L-Mount Batterien verlassen.

Limiter, Bittiefe, Abtastraten, Gain, Pan, Low-Cut, Phasenumkehr und Phantomspeisung lassen sich nach deinen Wünschen anpassen.

Hält viel aus

Alle Modelle sind robust, leicht und klein – du kannst sie einfach einpacken, auf einem Stativ oder einer Kamera montieren oder sie zusammen mit der Wingman App und einer der vier von uns unterstützten USB Controller ans Set mitnehmen.

Eigenschaften

Kashmir ™ Mikrofonvorverstärker mit 48 V Phantom

Interner Timecode-Generator

Abtastraten bis 192 kHz

Bittiefen bis zu 32-Bit-Float

Einstellbare Limiter

Aufnahme und Lesen von SD-Karten

Sicherung auf USB-Laufwerk

10 Sekunden Pre-Roll bei 48 kHz

Unterstützung verschiedener 3rd Party USB Controller

Mit Plugins anpassen

Fügen Sie Low Cut, High Pass, Delay, Polarity Invert und Panning hinzu

Gleichzeitiges Aufnehmen, Mischen und USB-Audio-Streaming

Aufzeichnung über Timecode oder HDMI-Timecode auslösen

Grundlegende, erweiterte und benutzerdefinierte Modi

HiFi-Kopfhörerverstärker

MixPre II Vergleichstabelle

 

MixPre-10 II MixPre-6 II MixPre-3 II
Mixer
10 x 4 6 x 2 3 x 2
Analog-Eingänge
8 XLR/TRS Kombo,
3,5 mm Aux Eingang
4 XLR/TRS Kombo,
3,5 mm Aux Eingang
3 XLR/TRS Kombo,
3,5 mm Aux Eingang
Analog-Ausgänge
+18 dBu XLR Ausgang,
3,5mm X1/X2
3,5 mm X1/X2 3,5mm X1/X2
USB Audio Streaming
12 Eingänge/4 Ausgänge
zu Mac &/oder Windows
mit ASIO Treiber
2 Eingänge/2 Ausgänge
zu Windows ohne ASIO Treiber
8 Eingänge/4 Ausgänge
zu Mac &/oder Windows
mit ASIO Treiber
2 Eingänge/2 Ausgänge
zu Windows ohne ASIO Treiber
5 Eingänge/2 Ausgänge
zu Mac &/oder Windows
mit ASIO Treiber
2 Eingänge/2 Ausgänge
zu Windows ohne ASIO Treiber
ISO Spuren
12 (10 ISO + LR Mix) 8 (6 ISO + LR Mix) 5 (3 ISO + LR Mix)
Timecode Eingang
BNC Eingang, 3,5 mm Aux Eingang,
HDMI
3,5 mm Aux Eingang, HDMI 3,5 mm Aux Eingang, HDMI
Timecode Ausgang
BNC Ausgang, 3,5 mm Stereo Ausgang 3,5 mm Stereo Ausgang 3,5 mm Stereo Ausgang
Timecode Sync
Intern, Word Clock, Externer LTC Intern Intern

 

Modelle

MixPre-3 II

Pocket-Sized Portability

mixpre3_ii_front-S
mixpre3_ii_left-S
mixpre3_ii_right-S
mixpre3_ii_top-S
mixpre3_ii_angle-S
mixpre3_ii_back-S
mixpre3_ii_bottom-S
Highlights

Three ultra-low-noise Kashmir microphone preamps with adjustable limiters capture high quality audio in the field, on set, or with a computer.

Create a mix using the built-in 3 x 2 portable mixer.

Record up to 5 tracks to an SD card and backup to a USB thumb drive.

5-in, 2-out USB audio interface streams to your computer via USB-C.

Choose bit depths from 16 to 32-bit float, and sampling rates from 44.1 kHz to 192 kHz.

Internal LTC timecode generator. Timecode In/Out via Aux In/Stereo Out.

Timecode and record triggering via HDMI.

USB-A for control surfaces, keyboards, and auto-copy to USB drive.

In-unit ISO mixing, gain, pan, low-cut, phase inversion, and phantom power.

Sunlight-readable color touch screen and LED metering.

Lightweight, durable, and small: perfect for bag use, mobile recording, or a home studio.

Powerful 300 mW+300 mW headphone amp allows clear and accurate reference of audio.

Includes a MX-4AA Battery Sled (batteries not included), MX-PSU AC Power Supply, and USB-C to USB-C cable.

Customize with plugins from the Plugin Store.

What’s New in the MixPre-3 II?

Bit depth up to 32-bit float for increased dynamic range.

Record up to 192 kHz.

Faster, more advanced hardware.

Internal LTC Timecode Generation and Output.

Adjustable Limiters.

Auto-copy to USB Drive.

Pre-roll buffer increased to 10 seconds.

Description

Versatile. Durable. High-Performance.

If you record field audio, sound effects, podcasts, voice-overs, music, audio for film, or are just starting your audio journey, the MixPre-3 II is for you! With three crystal-clear, ultra low-noise Kashmir preamps, you can record multiple actors, multiple podcasters, or audio for small productions with superior quality – all the way up to a 32-bit float bit depth and a 192 kHz sample rate. This newest generation of Sound Devices’ award-winning MixPre Series has been redesigned for increased performance and an astounding 142 dB of dynamic range.

Your MixPre-3 II is highly customizable to your needs. Record internally to a compatible SD card on set or stream your podcast over USB to your computer at home. Power with your computer, wall power, or record in the middle of nowhere with AA or Sony L-mount batteries. Adjust limiters, bit depth, sample rates, gain, pan, low-cut, phase inversion and phantom power to your liking. Trigger your camera with the internal timecode generator, or feed timecode in via HDMI or Aux In. The choice is yours!

Professionals love the flexibility of the MixPre Series. Don’t need all those options? Basic mode has you covered.

Your MixPre-3 II is rugged, lightweight, and small, so you can throw it in a bag or mount it to a tripod or camera – or get situated on set with our Wingman App and one of our four supported USB control surfaces. With the superior sound and build quality that you can expect from the industry leader in production audio recording, your MixPre-3 II can capture audio for any application. Our friendly and knowledgeable support team, based in the USA and Germany, is here for all your questions and comments. Our job is to make your job easier.

Customize With Plugins

Are you a songwriter or musician? Buy the Musician Plugin to easily create a song using your MixPre-3 II as a standalone recorder or USB interface. Use onboard features like overdub, bounce, reverb, and tracking to a metronome. Create Music Projects to lay down backing tracks and use them live or at home for writing or practicing. Capturing your song ideas has never been easier! While in Music Mode, the MixPre-3 II is limited to three simultaneous live inputs.

Specs
Audio Inputs

Frequency Response 10 Hz to 80 kHz +/- 0.5 dB re 1 kHz @ 192 kHz sample rate

THD + Noise 0.005% max (@1 kHz, 22-22 kHz BW, gain= 20 dB, -10 dBu in)

ADC 32 bit precision; 142 dB dynamic range min (A-weighted, gain = 10 dB, fader = 0 dB)

Equivalent Input Noise -130 dBV (-128 dBu) max (A-weighting, gain = 76 dB, 150 ohm source impedance)

Mic inputs XLR active-balanced; 4k input

Line inputs XLR active-balanced; 4k input

Aux/Mic in 3.5 mm TRS, 2-channel unbalanced; 100k input

USB Audio 2 channels

All inputs fully RF-filtered and overload protected.

Mic input gain: +6 dB to +76 dB

Line input gain: -20 dB to +30 dB

Fader: -inf to +20 dB

Headphone gain: -inf to +20 dB

Total gain, Mic-to-recording (max): +96 dB

Aux In (Mic): Gain = +10 dB to +40 dB

Aux In (Line): Gain = -10 dB to +20 dB

Total Aux Gain including Fader (Mic-to-recording): +60 dB

Maximum Input Level Mic XLR: +14 dBu (limiters on or off)

Maximum Input Level Line XLR/¼-inch: +28 dBu (limiters on or off)

Maximum Input Level Aux In (Mic): -10 dBu

Maximum Input Level Aux In (Line): +10 dBu

Low Cut Filters 40 Hz to 160 Hz (adjustable), 18 dB/oct. First stage analog, subsequent stages digital.

Microphone Powering Mic XLRs: 48 V via 6.8k resistors, 10 mA each

Microphone Powering Mic 3.5 mm: 3 V @ 3k source

Limiter at all gain stages, range > 40dB. First stage analog, subsequent stages digital. Adjustable Threshold, Ratio, and Release.

Audio Outputs

DAC feeding Stereo Out, Headphone Out 32 bit precision; 115 dB dynamic range (A-weighted)

L/R Out 3.5 mm TRS stereo unbalanced, 500 ohm output impedance, +7.8 dBu max output level

Headphones Out 3.5 mm TRS stereo unbalanced, 300 mW + 300 mW, for use with any impedance headphones

USB

USB Audio Interface (USB-C): 5-in/2-out (from computer); 44.1 kHz/48 kHz/96 kHz; 16/24-bit; Class-compliant USB 2.0 high speed driver

USB Mass Storage (USB-C): USB 2.0 high speed

USB Keyboard (USB-A): Text entry and control

USB Thumbdrive (USB-A): Manual or auto-copy to drive

USB Midi Control Surface (USB-A)

Recording

Maximum Record Tracks 5 Stereo mix + 3 ISOs

Sampling Frequency 44.1, 47.952, 48, 48.048, 96, 192 kHz

Bit Depth 16, 24, 32 Float

Recording Storage Type: SD, SDXC, SDHC Card, & USB thumbdrive (copy only)

Recording Storage Max Storage Size: 512 GB (SDXC)

Recording Storage Card format: exFAT

Recording File Type Polyphonic WAV

Timecode

Timecode Modes Free Run, Time of Day (file stamped w/current ToD, Rec Run, Ext LTC (file stamped w/incoming LTC on 3.5mm Aux In), Camera TC (file stamped w/incoming TC from cameras that output TC)

Timecode Frame Rates Auto-detects (fps): 23.98 (same as 23.976), 24, 25, 29.97DF, 29.97ND, 30, 30DF

3.5 mm Aux In Timecode Input 20k ohm impedance, 0.3 V – 3.0 V p-p (–17 dBu – +3 dBu)

3.5 mm Stereo Out | Timecode Output 1k ohm impedance, 3.0V p-p (+12 dBu)

HDMI TC Reader via HDMI

Remote Control

Bluetooth LE: Wireless control using Wingman app

HDMI (micro): Auto-record start/stop trigger from cameras that output record flag over HDMI

Timecode: Auto-record start/stop trigger via Aux In timecode

Touch Screen

320×256; 1.6-inch, color, sunlight-viewable IPS LCD

Power

AA Batteries: 4x AA sled (included); 8x AA sled (optional accessory). NiMH recommended

L-Mount: Optional sled for 2x (hot-swappable) Li-ion batteries

From computer: Bus-powered via USB-C port

AC Adapter: MX-PSU (included) Power supply wall adapter w/ USB-C connector; 15 W; has 4 adapter plugs for US, UK, AU & Europe

Environmental

Operating: -20°C to 60°C, 0 to 90% relative humidity; (non-condensing)

Storage: -40°C to 85°C

Dimensions

36 mm x 144 mm x 110 mm (H x W x D); 1.40” x 5.68” x 4.35”

Weight

0.48 kg; 16.8 oz. (unpackaged, without batteries)

MixPre-6 II

Anytime, Anywhere Audio

mixpre6_ii_front-S
mixpre6_ii_left-S
mixpre6_ii_right-S
mixpre6_ii_top-S
mixpre6_ii_angle-S
mixpre6_ii_back-S
mixpre6_ii_bottom-S
Highlights

Four ultra-low-noise Kashmir microphone preamps with adjustable limiters capture high quality audio in the field, on set, or with a computer.

Create a mix using the built-in 6 x 2 portable mixer.

Record up to 8 tracks to an SD card and backup to a USB thumb drive.

8-in, 4-out USB audio interface streams to your computer via USB-C.

Choose bit depths from 16 to 32-bit float, and sampling rates from 44.1 kHz to 192 kHz.

Internal LTC timecode generator. Timecode In/Out via Aux In/Stereo Out.

Timecode and record triggering via HDMI.

USB-A for control surfaces, keyboards, and auto-copy to USB drive.

In-unit ISO mixing, gain, pan, low-cut, phase inversion, and phantom power.

Sunlight-readable color touch screen and LED metering.

Lightweight, durable, and small: perfect for bag use, mobile recording, or a home studio.

Powerful 300 mW+300 mW headphone amp allows clear and accurate reference of audio.

Includes a MX-4AA Battery Sled (batteries not included), MX-PSU AC Power Supply, and USB-C to USB-C cable.

Customize with plugins from the Plugin Store.

What’s New in the MixPre-6 II?

Bit depth up to 32-bit float for increased dynamic range.

Faster, more advanced hardware.

Internal LTC Timecode Generation and Output.

Adjustable Limiters.

Auto-copy to USB Drive.

Pre-roll buffer increased to 10 seconds.

Description

Versatile. Durable. High-Performance.

If you record field audio, sound effects, podcasts, voice-overs, music, audio for film, or are just starting your audio journey, the MixPre-6 II is for you! With four crystal-clear, ultra low-noise Kashmir preamps, you can record multiple actors, multiple podcasters, or audio for film with superior quality  – all the way up to a 32-bit float bit rate and a 192 kHz sample rate. This newest generation of Sound Devices’ award-winning MixPre Series has been redesigned for increased performance and an astounding 142 dB of dynamic range.

Your MixPre-6 II is highly customizable to your needs. Record internally to a compatible SD card on set or stream your podcast over USB to your computer at home. Power with your computer, wall power, or record in the middle of nowhere with AA or Sony L-mount batteries. Adjust limiters, bit depth, sample rates, gain, pan, low-cut, phase inversion and phantom power to your liking. Trigger your camera with the internal timecode generator, or feed timecode in via HDMI or Aux In. The choice is yours!

Professionals love the flexibility of the MixPre Series. Don’t need all those options? Basic mode has you covered.

Your MixPre-6 II is rugged, lightweight, and small, so you can throw it in a bag or mount it to a tripod or camera – or get situated on set with our Wingman App and one of our four supported USB control surfaces. With the superior sound and build quality that you can expect from the industry leader in production audio recording, your MixPre-6 II can capture audio for any application. Our friendly and knowledgeable support team, based in the USA and Germany, is here for all your questions and comments. Our job is to make your job easier.

Customize With Plugins

Are you a songwriter or musician? Buy the Musician Plugin to easily create a song using your MixPre-6 II as a standalone recorder or USB interface. Use onboard features like overdub, bounce, reverb, and tracking to a metronome. Create Music Projects to lay down backing tracks and use them live or at home for writing or practicing. Capturing your song ideas has never been easier! While in Music Mode, the MixPre-6 II is limited to six simultaneous live inputs.

Download the free Ambisonics Plugin to record in 360° audio and monitor binaurally with an ambisonic microphone like the Sennheiser AMBEO and your MixPre-6 II.

Specs
Audio Inputs

Frequency Response 10Hz to 80kHz +/- 0.5dB re 1kHz @ 192kHz sample rate

THD + Noise 0.005% max (@1kHz, 22-22kHz BW, gain=20dB, -10dBu in)

Audio Inputs ADC 32 bit precision; 142 dB dynamic range min (A-weighted, gain=10dB, fader=0dB)

Equivalent Input Noise -130dBV (-128dBu) max (A-weighting, gain=76dB, 150 ohm source impedance)

Mic inputs XLR active-balanced; 4k input

Line inputs XLR active-balanced; 4k input

Aux/Mic in: 3.5mm TRS, 2-channel unbalanced; 100k input

Line inputs ¼-inch TRS active-balanced; 4k input

USB audio input 4 channels

All inputs fully RF-filtered and overload protected.

Mic input gain: +6dB to +76dB

Line input gain -20dB to +30dB

Fader gain -inf to +20dB

Headphone gain -inf to +20dB

Total gain, Mic-to-recording (max): +96dB

Aux In (Mic): Gain = +10dB to +40dB

Aux In (Line): Gain = -10dB to +20dB

Total Aux Gain including Fader (Mic-to-recording): +60dB

Maximum Input Level Mic XLR: +14dBu (limiters on or off)

Maximum Input Level Line XLR: +28dBu (limiters on or off)

Maximum Input Level Aux In (Mic): -10dBu

Maximum Input Level Aux In (Line): +10dBu

Low Cut Filters 40Hz to 160Hz (adjustable), 18 dB/oct. First stage analog, subsequent stages digital.

Microphone Powering Mic XLRs: 48V via 6.8k resistors, 10mA each

Microphone Powering Mic 3.5mm: 3V @ 3k source

Limiter at all gain stages, range > 40dB. First stage analog, subsequent stages digital. Adjustable Threshold, Ratio, and Release.

Audio Outputs

DAC feeding Stereo Out, Headphone Out 32 bit precision; 115dB dynamic range (A-weighted)

Stereo Out 3.5mm TRS stereo unbalanced, 500 ohm output, +7.8dBu max output level

Headphones Out 3.5mm TRS stereo unbalanced, 300mW + 300mW, for use with any impedance headphones

USB

USB Audio Interface (USB-C): 8-in/4-out; 44.1 to 96 kHz; 16/24-bit; Class-compliant USB 2.0 high speed or ASIO® (supplied via download)

USB Mass Storage (USB-C): USB 2.0 high speed

USB Keyboard (USB-A): Text entry and control

USB Thumbdrive (USB-A): Manual or auto-copy to drive

USB Midi Control Surface (USB-A)

Recording

Maximum Record Tracks 8 Tracks: Stereo mix + 6 ISOs

Sampling Frequency 44.1, 47.952, 48, 48.048, 96, 192 kHz

Bit Depth 16, 24, 32 Float

Recording Storage Type: SD, SDXC, SDHC Card (USB thumbdrive, copy only) Max Storage Size: 512 GB (SDXC)

Recording Storage Card format: exFAT

File Type Polyphonic WAV

Timecode

Timecode Modes Free Run, Time of Day (file stamped w/current ToD),Rec Run, Ext LTC (file stamped w/incoming LTC on 3.5mm Aux In), Camera TC (file stamped w/incoming TC from cameras that output TC)

Timecode Frame Rates Auto-detects (fps): 23.98 (same as 23.976), 24, 25, 29.97DF, 29.97ND, 30, 30DF

3.5 mm Aux In Timecode Input 20k ohm impedance, 0.3 V – 3.0 V p-p (–17 dBu – +3 dBu)

3.5 mm Stereo Out Timecode Output 1k ohm impedance, 3.0V p-p (+12 dBu)

HDMI TC Reader via HDMI

Remote Control

Bluetooth LE: Wireless control using Wingman app

HDMI (micro): Auto-record start/stop trigger from cameras that output record flag over HDMI

Timecode: Auto-record start/stop trigger via Aux In timecode

Touch Screen

320×256; 1.6-inch, color, sunlight-viewable IPS LCD

Power

AA Batteries: 4x AA sled (included); 8x AA sled (optional accessory). NiMH recommended

From computer: Bus-powered via USB-C port; optional MX-USBY cable, connects one USB-C to two USB-A ports

AC Adapter: MX-PSU (included) Power supply wall adapter w/ USB-C connector; 15W; has 4 adapter plugs for US, UK, AU & Europe

L-Mount: Optional sled for 2x (hot-swappable) Sony L-type Li-ion batteries

Environmental

Operating: -20°C to 60°C, 0 to 90% relative humidity; (non-condensing)

Storage: -40°C to 85°C

Dimensions

36 mm x 166 mm x 118 mm (H x W x D); 1.40” x 6.53” x 4.65”

Weight

0.56 kg; 19.9 oz. (unpackaged, without batteries)

MixPre-10 II

Complex Productions, Simplified

mixpre10_ii_front-S
mixpre10_ii_right-S
mixpre10_ii_left-S
mixpre10_ii_top-S
mixpre10_ii_angle-S
mixpre10_ii_back-S
mixpre10_ii_bottom-S
Highlights

Eight ultra-low-noise Kashmir microphone preamps with adjustable limiters capture high quality audio in the field, on set, or with a computer.

Create a mix using the built-in 10 x 4 portable mixer.

Record up to 12 tracks to an SD card and backup to a USB thumb drive.

12-in, 4-out USB audio interface streams to your computer via USB-C.

Choose bit depths from 16 to 32-bit float, and sampling rates from 44.1 kHz to 192 kHz.

Internal LTC timecode generator. Timecode In/Out via BNC or Aux In/Stereo Out.

Timecode and record triggering via HDMI.

USB-A for control surfaces, keyboards, and auto-copy to USB drive.

In-unit ISO mixing, gain, pan, low-cut, phase inversion, and phantom power.

Sunlight-readable color touch screen and LED metering.

Lightweight, durable, and small: perfect for bag use, mobile recording, or a home studio.

Powerful 300 mW+300 mW headphone amp allows clear and accurate reference of audio.

Includes a MX-8AA Battery Sled (batteries not included), XL-WPH3 AC Power Supply, and USB-C to USB-C cable.

Customize with plugins from the Plugin Store.

What’s New in the MixPre-10 II?

Bit depth up to 32-bit float for increased dynamic range.

Faster, more advanced hardware.

Adjustable Limiters.

Increased output level to +18 dBu on TA3.

Description

Versatile. Durable. High-Performance.

If you record field audio, sound effects, audio for film, live music, or are just starting your audio journey, the MixPre-10 II is for you! With eight crystal-clear, ultra low-noise Kashmir preamps, you can record multiple actors, multiple podcasters, or audio for film with superior quality – all the way up to a 32-bit float bit depth and a 192 kHz sample rate. This newest generation of Sound Devices’ award-winning MixPre Series has been redesigned for increased performance and an astounding 142 dB of dynamic range.

Your MixPre-10 II is highly customizable to your needs. Record internally to a compatible SD card on set or stream your podcast over USB to your computer at home. Power with your computer, wall power, or record in the middle of nowhere with AA or Sony L-mount batteries. Adjust limiters, bit depth, sample rates, gain, pan, low-cut, phase inversion and phantom power to your liking. Stay in sync with your camera using the internal timecode generator, or feed timecode in via HDMI, Aux In, or BNC. The choice is yours!

Professionals love the flexibility of the MixPre Series. Don’t need all those options? Basic mode has you covered.

Your MixPre-10 II is rugged, lightweight, and small, so you can throw it in a bag or mount it to a tripod or camera – or get situated on set with our Wingman App and one of our four supported USB control surfaces. With the superior sound and build quality that you can expect from the industry leader in production audio recording, your MixPre-10 II can capture audio for any application. Our friendly and knowledgeable support team, based in the USA and Germany, is here for all your questions and comments. Our job is to make your job easier.

Customize With Plugins

Are you a songwriter or musician? Buy the Musician Plugin to easily create a song using your MixPre-10 II as a standalone recorder or USB interface. Use onboard features like overdub, bounce, reverb, and tracking to a metronome. Create Music Projects to lay down backing tracks and use them live or at home for writing or practicing. Capturing your song ideas has never been easier! While in Music Mode, the MixPre-10 II is limited to eight simultaneous live inputs.

Download the free Ambisonics Plugin to record in 360° audio and monitor binaurally with an ambisonic microphone like the Sennheiser AMBEO and your MixPre-10 II.

Specs
Audio Inputs

Frequency Response 10Hz to 80kHz +/- 0.5dB re 1kHz @ 192kHz sample rate

THD + Noise 0.005% max (@1kHz, 22-22kHz BW, gain=20dB, -10dBu in)

ADC 32 bit precision; 142dB dynamic range min (A-weighted, gain=10dB, fader=0dB)

Equivalent Input Noise -130dBV (-128dBu) max (A-weighting, gain=76dB, 150 ohm source impedance)

Mic input XLR active-balanced; 4k input

Line input XLR active-balanced; 4k input

Aux/Mic in: 3.5mm TRS, 2-channel unbalanced; 100k input

Line input ¼-inch TRS active-balanced; 4k input

USB audio input: 4 channels

All inputs fully RF-filtered and overload protected.

Mic input gain +6dB to +76dB

Line input gain -20dB to +30dB

Fader gain -inf to +20dB

Headphone gain: -inf to +20dB

Total gain Mic-to-recording (max): +96dB

Aux In (Mic): Gain = +10dB to +40dB

Aux In (Line): Gain = -10dB to +20dB

Total Aux Gain including Fader (Mic-to-recording): +60dB

Maximum Input Level Mic XLR: +14dBu (limiters on or off)

Maximum Input Level Line XLR/¼-inch: +28dBu (limiters on or off)

Maximum Input Level Aux In (Mic): -10dBu

Maximum Input Level Aux In (Line): +10dBu

Low Cut Filters 40Hz to 160Hz (adjustable), 18 dB/oct. First stage analog, subsequent stages digital.

Microphone Powering Mic XLRs: 48V via 6.8k resistors, 10mA each

Microphone Powering Mic 3.5mm: 3V @ 3k source

Limiter at all gain stages, range > 40dB. First stage analog, subsequent stages digital. Adjustable Threshold, Ratio, and Release.

Audio Outputs

DAC feeding Stereo Out, Headphone Out 32 bit precision; 115dB dynamic range (A-weighted)

L/R Out TA3 2-channel balanced, 1.1K max output impedance, +18 dBu max output level

X1/X2 Out 3.5mm TRS stereo unbalanced, 500 ohm output impedance, +7.8dBu max output level

Headphones Out 3.5mm TRS stereo unbalanced, 300mW + 300mW, for use with any impedance headphones

USB

USB Audio Interface (USB-C): 12-in/4-out; 44.1 to 96 kHz; 16/24-bit; Class-compliant USB 2.0 high speed or ASIO® driver (supplied via download)

USB Mass Storage (USB-C): USB 2.0 high speed

USB Keyboard (USB-A): Text entry and control

USB Thumbdrive (USB-A): Manual or auto-copy to drive

USB Midi Control Surface (USB-A)

Recording

Maximum Record Tracks 12 Tracks: Stereo mix + 10 ISOs

Sampling Frequency 44.1, 47.952, 48, 48.048, 96, 192 kHz

Bit Depth 16, 24, 32 Float

Recording Storage Type: SD, SDXC, SDHC Card (USB thumbdrive, copy only) Max Storage Size: 512 GB (SDXC)

Recording Storage Card format: exFAT

Recording File Type Polyphonic WAV

Timecode

Timecode Modes Free Run, Time of Day (file stamped w/current ToD), Rec Run, Ext LTC (file stamped w/incoming LTC on BNC or Aux 3.5mm), Camera TC (file stamped w/incoming TC from cameras that output TC)

Timecode Frame Rates Auto-detects (fps): 23.98 (same as 23.976), 24, 25, 29.97DF, 29.97ND, 30, 30DF

Sync Source Internal, Word Clock, Ext LTC

BNC In (TC In) Switchable between Timecode (default) or Word Clock Input. Timecode: 20k ohm impedance, 0.3 V – 3.0 V p-p (–17 dBu – +3 dBu). Word Clock: 10k ohm impedance, 1.5V p-p

BNC Out (TC Out) Switchable between Timecode (default) or Word Clock Output. Timecode: 1k ohm impedance, 3.0V p-p (+12 dBu). Word Clock: 75 ohm impedance, 5V p-p

TC Reader via HDMI

Remote Control

Bluetooth LE: Wireless control using Wingman app

HDMI (micro): Auto-record start/stop trigger from cameras that output record flag over HDMI

Timecode: Auto-record start/stop trigger via Aux In timecode

Touch Screen

320×256; 1.6-inch, color, sunlight-viewable IPS LCD

Power

AA Batteries: 8x AA sled (included). NiMH recommended

L-Mount: Optional sled for 2x (hot-swappable) Li-ion batteries

AC Adapter: XL-WPH3 (included): Universal, 45 W in-line AC-to-DC power supply Hirose 4-pin DC plug, with detachable IEC power cord. 100-240, 50/60Hz

Environmental

Operating: -20°C to 60°C, 0 to 90% relative humidity; (non-condensing)

Storage: -40°C to 85°C

Dimensions

36 mm x 206 mm x 175 mm (H x W x D); 1.375” x 8.125” x 6.875”

Weight

0.91 kg; 32.1 oz. (unpackaged, without batteries)

Mit Plugins anpassen

Bist du Songwriter oder Musiker? Mit dem Musician Plugin kannst du einfach einen Song mit deinem MixPre II als eigenständigem Rekorder oder als USB-Schnittstelle erstellen. Nutze integrierte Funktionen wie Overdub, Bounce, Reverb und Tracking zu einem Metronom. Du kannst Musikprojekte erstellen, um Playbacks anzulegen und sie live oder zu Hause zum Songschreiben oder Üben zu verwenden. Song-Ideen festhalten war noch nie so einfach!

Lade dir das kostenlose Ambisonics Plugin herunter, um mit einem Ambisonic-Mikrofon wie dem Sennheiser AMBEO und einem MixPre-6 II oder MixPre-10 II in 360 °-Audio aufzunehmen und binaural zu überwachen.

 

MixPre Gen 1+2 Vergleichstabelle MixPre II Original MixPre
32-bit Float Aufnahme Alle Modelle
192 kHz Aufnahme Alle Modelle Nur MixPre-6 & -10T
Timecode Generator / – Empfänger Alle Modelle Nur MixPre -10T
Dateien kopieren per USB Alle Modelle Nur MixPre -10T
+18 dBu Ausgabe MixPre-10 II
Anpassbare Limiter Optionen Alle Modelle
Sample Rate Aufnahme Alle MixPre II Modelle

(44.1, 47.952, 48, 48.048, 96, 192 kHz)

MixPre-3 (44.1, 48, 96 kHz )

MixPre-6 (44.1, 48, 96, 192 kHz)

MixPre-10T (44.1, 47.952, 48, 48.048, 96, 192 kHz)

Pre-Roll Dauer bei 48 kHz Alle Modelle: 10 Sekunden MixPre-10T: 10 Sekunden

MixPre-3 and -6: 5 Sekunden

Zubehör

XL-2

(2) 25-Zoll-Kabel von TA3-F zu XLR-M (Stecker)

MX-PSU

Netzteil mit USB-C-Anschluss (inklusive Adapterstecker für USA, Großbritannien, Australien und Europa (im Lieferumfang von -3 II und -6 II enthalten)

Wingman App

Steuern Sie Ihren MixPre II aus der Ferne mit dieser kostenlosen App für Android und iOS