8-kanaliger 10-Spur Field-Audiorecorder/Mixer
Bedienungsanleitung
8 Eingänge mit Neutrik XLR/TRS-Combo-Buchsen
Kompaktes und leichtes Aluminium-Gehäuse
Hochwertige Mikrofonvorverstärker mit bis zu 75 dB Gain
+4 dBu Line-Eingänge
Aufnahmen mit max. 24 Bit / 192 kHz sowie den Formaten 47,952/48,048 kHz für HD-Video-Kompatibilität
Timecode- Eingabe und -Ausgabe über BNC-Anschlüsse
Drei unterschiedliche Optionen zur Stromversorgung: 8 x Typ AA Batterien, externer Gleichstrom-Akku mit Hirose-Anschluss oder 12 V Wechselstromnetzteil (Typ AA Batterien und Gleichstrom-Akku sind nicht im Lieferumfang enthalten)
Gain-Regler mit Pegelanzeige und PFL/Solo-Schalter pro thomann Kanal
Phantomspeisung (+48 V / +24 V)
Limiter für Ein- und Ausgänge
Mitte/Seite-Decoder
Kompatibel mit den ZOOM-Mikrofonkapseln
Zwei symmetrische Mini-XLR-Main-Ausgänge (TA3)
Separater Kopfhörer-Ausgang
Beleuchtetes 2,4″ Vollfarb-LCD
Zwei SD/SDHC/SDXC-Karten-Slots für Medien mit jeweils bis zu 512 GB
Integrierter Montage-Adapter für Dreibeinstative
Betrieb als USB-Audio-Interface mit 8 thomann Ein-/4 Ausgängen (bei 96 kHz)
Im Lieferumfang enthalten: Adapter zur Kamera-Montage, ZOOM AD-19 DC 12 V Netzteil, Bedienungsanleitung, 2x Adapter von TA3 auf XLR, Download-Codes für Cubase LE und WaveLab LE Software
Abmessungen (B x T x H): 178,2 x 140,3 x 54,3 mm
Gewicht: 960 g
| Technical Details |
|---|
| RECORDING MEDIA |
| Dual SD card slot supports: 16 MB–2 GB SD cards | 4 GB–32 GB SDHC cards | 64 GB–512 GB SDXC cards |
| INPUTS: 1-8 |
| Connectors: XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot) |
| INPUTS: XLR (MIC) |
| Input gain: +10 – +75 dB |
| Input impedance: 3.3 kΩ |
| Maximum input level: +14 dBu (at 0 dBFS, limiter ON) |
| Phantom power: +24/+48V 10 mA maximum for each channel |
| THD (Total Harmonic Distortion): 0.009% max (1kHz, 22Hz-22kHz BW, Input Gain min, -10dBu input) |
| INPUTS: TRS (LINE) |
| Input gain: −10 – +55 dB |
| Input impedance: 28 kΩ |
| Maximum input level: +34 dBu (at 0 dBFS, limiter ON) |
| THD (Total Harmonic Distortion): 0.010% max (1kHz, 22Hz-22kHz BW, Input Gain min +10dBu input) |
| INPUTS: Additional Info |
| Equivalent input noise: −127 dBu or less |
| (A-weighted, +75 dB input gain, 150Ω input) |
| Frequency characteristics: 10 Hz – 80 kHz +0.5 dB/−1 dB (192 kHz sampling rate) |
| A/D dynamic range: 120 dB typ (−60 dBFS input, A-weighted) |
| Crosstalk: −90 dB or less (between adjacent channels, 1 kHz) |
| MIC IN: ZOOM mic capsule input (use disables Inputs 1/2) |
| SLATE MIC: Built-in mic for voice memos can freely be assigned to tracks |
| OUTPUTS: MAIN OUT 1/2 |
| Connectors: TA3 connectors, balanced output (2: hot) |
| Output impedance: 150 Ω or less |
| Reference output level: −10 dBV (Normal Output Type), −40 dBV (Mic Output Type), 1 kHz, 600Ω load |
| Maximum output level: +10 dBV (Normal Output Type), −20 dBV (Mic Output Type), 1 kHz, 600Ω load |
| OUTPUTS: SUB OUT 1/2 |
| Connector: 3.5mm stereo mini unbalanced output jack |
| Output impedance: 100 Ω or less |
| Reference output level: −10 dBV (Normal Output Type), −40 dBV (Mic Output Type), 1 kHz, 10kΩ load |
| Maximum output level: +10 dBV (Normal Output Type), −20 dBV (Mic Output Type), 1 kHz, 10kΩ load |
| HEADPHONE |
| Connector: 1/4" unbalanced stereo output jack |
| Output impedance: 15 Ω or less |
| Maximum output level: 100 mW + 100 mW (32Ω load) |
| D/A |
| D/A dynamic range: 106 dB typical (−60 dBFS input, A-weighted) |
| Recording formats: When WAV selected |
| Supported formats: 44.1/47.952/48/48.048/88.2/96/192 kHz, 16/24-bit, mono/stereo/2-10 ch poly, BWF and iXML |
| Maximum simultaneous recording tracks: 10 (8 inputs + stereo mix) |
| 8 (with 192 kHz sampling rate) |
| Recording formats: When MP3 selected |
| Supported formats: 128/192/320 kbps, 44.1/48 kHz, ID3v1 tags |
| Maximum simultaneous recording tracks: 2 |
| Recording time |
| Using a 32GB card: 30:51:00 (48 kHz/24-bit stereo WAV) |
| 7:42:00 (192 kHz/24-bit stereo WAV) |
| TIMECODE |
| Connector: BNC |
| Modes: Off, Int Free Run, Int Record Run, Int RTC Run, Ext, Ext Auto Rec (audio clock can be synchronized to timecode) |
| Frame rates: 23.976ND, 24ND, 25ND, 29.97ND, 29.97D, 30ND, 30D |
| Precision: ±0.2 ppm |
| Supported input levels: 0.2 – 5.0 Vpp |
| Input impedance: 4.6 kΩ |
| Output level: 3.3 Vpp |
| Output impedance: 50 ? or less |
| POWER SUPPLIES |
| Batteries: 8 AA |
| AC adapter: AD-19 DC12V 2A (center plus) |
| External DC power supply: HIROSE HR10A-7R-4S 4-pin connector (1 pin: −, 4 pin: +), 9–16 V |
| Continuous recording time: When recording 2 channels at 48kHz/16-bit without headphones |
| Alkaline batteries: 8.5 hours or more |
| NiMH (2450mAh): 10 hours or more |
| Lithium batteries: 12.5 hours or more |
| Continuous recording time: When recording 8 channels at 48kHz/24-bit with headphones |
| Alkaline batteries: 4.5 hours or more |
| NiMH (2450mAh): 6 hours or more |
| Lithium batteries: 8.5 hours or more |
| Continuous recording time: When recording 8 channels at 192kHz/24-bit with headphones, phantom power and display backlighting |
| Alkaline batteries: 1 hour or more |
| NiMH (2450mAh): 2 hours or more |
| Lithium batteries: 3 hours or more |
| DISPLAY |
| 2.4" full-color LCD: 320x240 |
| USB: Mass storage operation |
| Class: USB 2.0 High Speed |
| USB: Multitrack audio interface operation (driver required for Windows, not required for Mac) |
| Class: USB 2.0 High Speed |
| Specifications: 44.1/48/96 kHz, 16/24-bit, 8-in/4-out |
| USB: Stereo Mix audio interface operation (no driver required) |
| Class: USB 2.0 Full Speed |
| Specifications: 44.1/48 kHz, 16-bit, 2-in/2-out |
| Note: iPad audio interface operation supported (Stereo Mix mode only) |
| EXTERNAL DIMENSIONS |
| Main unit: 7.0 in. (W) × 5.5 in. (D) × 2.1 in. (H) |
| 178.2 mm (W) × 140.3 mm (D) × 54.3 mm (H) |
| WEIGHT |
| Main unit only: 2.1 pounds (960 g) |
