Need Expert Advice? Call us: +49 (0) 89 360 55 10-0
B2B Shop for Commercial Customers
B2B Shop for Commercial Customers

Lectrosonics

SRAES3 - Digital Output Adapter for SRx

Digital Audio Output Adapter

€464.10

Prices plus VAT

In stock.

Quantity:

  • A00459

Features

Description

The Lectrosonics SRAES3 bottom plate adapter for all SR Series dual-channel slot receivers is now in stock! The SRAES3 will work with all SR receiver versions to provide audio in the following formats: AES3 digital audio at 48 kHz sampling with an internal clock

AES3 digital audio with an external word clock at 44.1, 48 or 96 kHz sampling; and balanced analog audio from -50 dBu to +5dBu in 1 dB steps. One or two channels of digital audio are delivered from the CH1 jack, while the CH2 jack delivers analog audio at all times.

 

Digital output for trouble-free low-noise audio

The SRAES3 will work with all SR dual slot receivers to provide audio in the following formats:

AES3 digital audio at 48 kHz sampling with an internal clock

AES3 digital audio with an external word clock at 44.1, 48 or 96 kHz sampling

Balanced analog audio from -50 dBu to +5dBu in 1 dB steps.

One or two channels of digital audio are delivered from the CH1 jack, while the CH2 jack delivers analog audio at all times.

The standard multi-pin interface and mounting holes are the same on all SR Series receiver output adapters. External word clock can be fed to the SRAES3 via the BNC connector. A 75 ohm termination of the word clock connection is applied by a field changeable jumper, installed by default at the factory. The housing is machined from a solid aluminum billet and hard anodized for ruggedness.

Description

The Lectrosonics SRAES3 bottom plate adapter for all SR Series dual-channel slot receivers is now in stock! The SRAES3 will work with all SR receiver versions to provide audio in the following formats: AES3 digital audio at 48 kHz sampling with an internal clock

AES3 digital audio with an external word clock at 44.1, 48 or 96 kHz sampling; and balanced analog audio from -50 dBu to +5dBu in 1 dB steps. One or two channels of digital audio are delivered from the CH1 jack, while the CH2 jack delivers analog audio at all times.

 

Digital output for trouble-free low-noise audio

The SRAES3 will work with all SR dual slot receivers to provide audio in the following formats:

AES3 digital audio at 48 kHz sampling with an internal clock

AES3 digital audio with an external word clock at 44.1, 48 or 96 kHz sampling

Balanced analog audio from -50 dBu to +5dBu in 1 dB steps.

One or two channels of digital audio are delivered from the CH1 jack, while the CH2 jack delivers analog audio at all times.

The standard multi-pin interface and mounting holes are the same on all SR Series receiver output adapters. External word clock can be fed to the SRAES3 via the BNC connector. A 75 ohm termination of the word clock connection is applied by a field changeable jumper, installed by default at the factory. The housing is machined from a solid aluminum billet and hard anodized for ruggedness.

  • Digital Output
  • Type: AES3/EBU
  • Output Level: -11 dBFS
  • Internal Clock Sample Rate: 48 kHz
  • External Clock Sample Rate: 44.1, 48 or 96 kHz
  • THD: 0.15%
  • Output Connectors: TA3 male (mini XLR)
  • Word Clock Input
  • Parameter: Standard TTL level
  • Termination: 75 ohm (removable)
  • Connector: BNC
  • Analog Output
  • Type: Balanced
  • Output Level: -50 to +5 dBu in 1 dB steps
  • THD: 0.15%
  • Power Requirements: (with SRc receiver) 7 min. to 18 max. VDC; 345 mA at 7 VDC; ¥ 200 mA at 12 VDC; ¥ 135 mA at 18VDC
END OF tabs.tpl
Viewed