Need Expert Advice? Call us: +49 (0) 89 360 55 10-0
B2B Shop for Commercial Customers
B2B Shop for Commercial Customers

Schoeps

CMC 1 L - Miniature Microphone Preamp

Microphone Amplifier

€758.00

plus VAT

Quantity:

  • A06950

Features

Description

The CMC 1 is our new, small Colette microphone amplifier, about one-third the length and 53% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.

At SCHOEPS, “uncompromising miniaturization” means that the electrical characteristics of the CMC 1 are equal to, or even better than, those of the CMC 6. Through modern electronic design, these outstanding electrical properties have been achieved:

  • high maximum SPL: 135 dB-SPL with the MK 4 (0.5% THD or less)
  • very low current consumption: 2.0 mA at 48 Volts
  • operates on 48 V or 12 V phantom power, reliable operation even if powering is somewhat marginal
  • very high immunity from RF interference with the SCHOEPS RFI Shield; high immunity to cable-induced hum and other interference (field tested with Audio Limited A 10, etc.)
  • flat frequency response
  • very low distortion
  • constant output impedance across the audio frequency range
  • balanced, direct-coupled, class-A output circuit
  • output is filtered in the ultrasonic range to prevent interference, e.g. from camera autofocus

A complete Colette-series microphone consists of an MK capsule and a CMC amplifer. All capsules and active accessories of the Colette system are compatible with the CMC 1.

The CMC 1 works with standard 12-Volt or 48-Volt phantom powering. Power consumption is lower at 12 Volts--an advantage for battery-powered operation

 

Features

  • Variant of the CMC 1 U with miniature Lemo output connector
  • K 5 LU (5 m cable with XLR-3M plug) and SGC stand adapter are included
  • Fully equal alternative to the well-known CMC 6
  • Compatible with all available MK capsules and active Colette accessories, e.g. CUT 60 or RC
  • Compatible with all accessories of the CCM series, e.g. TR L oder STA
  • Recommended accessories for boom use are the same as for CCM microphones, e.g. MINIX CCM LU or Rycote INV-5.

 

PRACTICE

The optimized RF protection of the CMC 1 makes it the ideal microphone for use with transmitters such as the Audio Limited A 10. The use of the CMC 1 U and CMC 1 L versions on the A 10 has been successfully tested.

 

Find info on the pin assignement of the adapter cable between the two devices here.

 

VARIANTS & OPTIONS

The CMC 1 is available in three variants:

 

CMC 1 U: XLR-3M output connector

CMC 1 L: Lemo output connector

CMC 1 K: permanently attached cable; standard version, 5 m with XLR-3M output plug (available starting early 2021). Other connectors or unterminated cable will be available on special order.

Description

The CMC 1 is our new, small Colette microphone amplifier, about one-third the length and 53% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.

At SCHOEPS, “uncompromising miniaturization” means that the electrical characteristics of the CMC 1 are equal to, or even better than, those of the CMC 6. Through modern electronic design, these outstanding electrical properties have been achieved:

  • high maximum SPL: 135 dB-SPL with the MK 4 (0.5% THD or less)
  • very low current consumption: 2.0 mA at 48 Volts
  • operates on 48 V or 12 V phantom power, reliable operation even if powering is somewhat marginal
  • very high immunity from RF interference with the SCHOEPS RFI Shield; high immunity to cable-induced hum and other interference (field tested with Audio Limited A 10, etc.)
  • flat frequency response
  • very low distortion
  • constant output impedance across the audio frequency range
  • balanced, direct-coupled, class-A output circuit
  • output is filtered in the ultrasonic range to prevent interference, e.g. from camera autofocus

A complete Colette-series microphone consists of an MK capsule and a CMC amplifer. All capsules and active accessories of the Colette system are compatible with the CMC 1.

The CMC 1 works with standard 12-Volt or 48-Volt phantom powering. Power consumption is lower at 12 Volts--an advantage for battery-powered operation

 

Features

  • Variant of the CMC 1 U with miniature Lemo output connector
  • K 5 LU (5 m cable with XLR-3M plug) and SGC stand adapter are included
  • Fully equal alternative to the well-known CMC 6
  • Compatible with all available MK capsules and active Colette accessories, e.g. CUT 60 or RC
  • Compatible with all accessories of the CCM series, e.g. TR L oder STA
  • Recommended accessories for boom use are the same as for CCM microphones, e.g. MINIX CCM LU or Rycote INV-5.

 

PRACTICE

The optimized RF protection of the CMC 1 makes it the ideal microphone for use with transmitters such as the Audio Limited A 10. The use of the CMC 1 U and CMC 1 L versions on the A 10 has been successfully tested.

 

Find info on the pin assignement of the adapter cable between the two devices here.

 

VARIANTS & OPTIONS

The CMC 1 is available in three variants:

 

CMC 1 U: XLR-3M output connector

CMC 1 L: Lemo output connector

CMC 1 K: permanently attached cable; standard version, 5 m with XLR-3M output plug (available starting early 2021). Other connectors or unterminated cable will be available on special order.

  • Frequency range: 20 Hz-20 kHz
  • Sensitivity: see corresponding capsule
  • Maximum output voltage: 1,8 V (5 dbV) with 1kΩ load
  • Maximum sound pressure level (THD < 0.5 %): 135 dB-SPL (P48) with MK 4, 131 dB-SPL (P12) with MK 4
  • Low cut filter: 20 Hz, 12dB/oct
  • Output impedance: 50 Ω +/- 1 Ω (8 Hz - 50 kHz)
  • Minimum recommended load impedance: 1 kΩ
  • Common mode rejection ratio (at 1 kHz): > 55 dB
  • Maximum cable length: > 400 m / ~1300 ft
  • SCHOEPS RFI Shield: Yes
  • Powering standard / Valid range: P48 / 30-52 V, P12 / 11-13 V
  • Current consumption: 2mA (P48), 3 mA (P12)
  • Output: Lemo, analog, 1 channel
  • Length: 25.5 mm / ~1 ''
  • Diameter: 20 mm / 0.8''
  • Weight: 28 g / ~1 oz
  • Surface finish: matte gray, custom color: nickel, chromagreen

INCLUDED ACCESSORIES

  • K 5 LU, STANDARD CABLE FOR CCM
END OF tabs.tpl
Viewed