Skip to product information
1 of 1

Lectrosonics

DBSM -DIgital Transmitter

DBSM -DIgital Transmitter

Digital Transcorder

Regular price 1.716,00 EUR

excl. VAT

Regular price Sale price 1.716,00 EUR
Sale
Frequency range
  • Auswahl der HF-Leistung bei 10, 25 und 50 mW
  • Ultraleichtes, korrosionsbeständiges Gehäuse
  • OLED-Schnittstelle mit Sperrfunktion
  • Servo-Bias-Eingangsschaltung
  • 2-Wege-IR-Anschluss (Infrarot) für schnelles Setup
  • Alternativer Einsatz als Rekorder auf interner microSDHC-Speicherkarte bei 48 kHz, 24 Bit
  • Timecode-Jam-Sync-Fähigkeit mit
  • High-Density-Modus für extrem enge Kanalabstände

in stock

Item number: A12953

The DBSM and DBSMD digital transcorders were developed specifically for the needs of the film industry and offer time code jam sync capability. They offer hands free setup and adjustment using audible tones and can be put to sleep to conserve battery power during setup while buried inside costuming, then awakened for normal operation when the production begins. Other features include input gain adjustment in 1 dB increments over a 44 dB range and adjustable low frequency audio roll-off for 3 dB down points at 20, 35, 50, 70, 100, 120 or 150 Hz to control subsonic and very low frequency audio content. The transmitters also offer selectable output power of 10, 25 and 50 mW. A special high-density (HDM) transmit mode at 2 mW allows for ultra-tight channel spacing without concern for frequency coordination.

The input section features the unique Lectrosonics servo bias input circuitry with a standard TA5M type jack for use with electret lavaliere mics, dynamic mics, or line level signals. A DSP-controlled analog audio limiter is employed ahead of the first mic preamp to protect the entire audio chain from overload. The limiter has a range of more than 30 dB for excellent overload protection, and a dual release envelope that makes the limiter acoustically transparent while maintaining low distortion of brief transients and longer duration peaks.

A water resistant control panel with OLED, membrane switches and multi-color LEDs make input gain adjustments, frequency and compatibility mode selection quick and accurate. The battery compartment accepts industry-accepted AA batteries (lithium recommended).

The DBSM and DBSMD use the same accessories as the SMWB and SMDWB transmitters, specifically belt clips, pouches, and battery eliminators.

  • DBSM(D)-A1B1: Band A1-B1: 470.100 - 607.950
  • DBSMD(D)/E01-A1B1: Band A1-B1: 470.100 - 614.375

NOTE: It’s the user’s responsibility to select the approved frequencies for the region where the transmitter is operating.

  • Channel Spacing: 25 kHz
  • RF Power output: DBSM: 2 (HDM only), 10, 25 or 50 mW
  • DBSMD 2 (HDM only), 10, 25 or 50 mW
  • Compatibility Modes: DBSM/DBSMD: D2 digital with encryption, and HDM high density digital with encryption
  • Modulation Type: 8 PSK
  • Frequency stability: ± 0.002%
  • Spurious radiation: Compliant with ETSI EN 300 422-1
  • Equivalent input noise: –125 dBV, A-weighted
  • If set for dynamic mic: 0.5 mV to 50 mV before limiting Greater than 1 V with limiting
  • If set for electret lavaliere mic: 1.7 uA to 170 uA before limiting Greater than 5000 uA (5 mA) with limiting
  • Line level input: 17 mV to 1.7 V before limiting Greater than 50 V with limiting
  • Dynamic mic: 300 Ohms
  • Electret lavaliere: Input is virtual ground with servo adjusted constant current bias
  • Line level: 2.7 k ohms
  • Soft limiter, 30 dB range
  • Fixed 5 V at up to 5 mA
  • Selectable 2 V or 4 V servo bias for any electret lavaliere
  • -7 to 44 dB; panel mounted membrane switches
  • Dual bicolor LEDs indicate modulation
  • –20, -10, 0, +10 dB referenced to full modulation
  • Control panel w/ LCD and 4 membrane switches
  • Adjustable from 20 to 150 Hz
  • Type: Analog mic/line level compatible; servo bias preamp for 2V and 4V lavaliere microphones
  • Input level: • Dynamic mic: 0.5 mV to 50 mV • Electret mic: Nominal 2 mV to 300 mV • Line level: 17 mV to 1.7 V
  • Input connector: TA5M 5-pin male
  • Frequency response: 20Hz to 20kHz, +/- 1dB: D2 Mode
  • Dynamic range: 112 dB (A)
  • Distortion: < 0.035%
  • Flexible, unbreakable steel cable
  • AA (+1.5 VDC), disposable, Lithium recommended
  • DBSM-A1B1: 3.2 oz. (90.719 grams)
  • DBSMD-A1B1: 4.8 oz. (136.078 grams)

DBSM-A1B1 w/o microphone:

  • 2.366 x 1.954 x 0.642 inches
  • 60.096 x 49.632 x 16.307 mm

DBSMD-A1B1:

  • 2.366 x 2.475 x 0.642 inches
  • 60.096 x 62.865 x 16.307 mm
  • DBSM-A1B1/DBSMD-A1B1: 170KG1E (D2 mode)
  • DBSM-A1B1/DBSMD-A1B1: 110KG1E (HD mode)
  • Storage media: microSDHC memory card
  • File format: .wav files (BWF)
  • A/D converter: 24-bit
  • Sampling rate: 48 kHz
  • HD mono mode: 24 bit - 144 kbytes/s
  • Analog mic/line level compatible;
  • servo bias preamp for 2V and 4V lavaliere microphones
  • Dynamic mic: 0.5 mV to 50 mV
  • Electret mic: Nominal 2 mV to 300 mV
  • Line level: 17 mV to 1.7 V
  • Input connector: TA5M 5-pin male
  • Frequency response: 20Hz to 20kHz, +/- 1dB:
  • Dynamic range: 112 dB (A)
  • Distortion: < 0.035%
  • Celsius: -20 to 50
  • Fahrenheit: -5 to 122

Specifications subject to change without notice.

  • 1x DBSM A1B1 (470.100 - 614.375 MHz)
  • 1x AA-Batterie
  • 1x AMM-19-Antenne
  • 1x AMM-22-Antenne
  • 1x SMWBBCUPSL Gürtelclip
  • 1x PSMWB Tasche mit Drehclip
  • 1x SMKITTA5 Steckerset mit Kofferraum
  • 1x 55010 - 16 GB microSD-Karte
View full details