Need Expert Advice? Call us: +49 (0) 89 360 55 10-0
B2B Shop for Commercial Customers
B2B Shop for Commercial Customers
ZS-LRLT

Lectrosonics

ZS-LRLT - Wireless Set w/ LR and LT

From €3,421.00 €3,601.00 *

plus VAT

Frequency range:

Quantity:

  • A00556

Features

Description

The L Series LR Receiver/LT Beltpack Transmitter and Mic with Accessory Kit from Lectrosonics is a compact digital hybrid wireless receiver and transmitter bundled with a lavalier microphone and accessories for capturing audio. This kit includes the LR portable receiver, LT portable transmitter, M152/5P omnidirectional lavalier microphone, LRSHOE camera shoe mount, one TA3F to XLRM cable, one TA3F to 1/8" TRS cable, and a zippered carrying pouch.

The new L Series units all share a wide tuning range of three standard Lectrosonics blocks, or 67.5 to 76.8 MHz, depending on the specific frequency band, and employ Lectrosonics' patented Digital Hybrid Wireless® technology for compandor-free audio along with compatibility modes for interoperability with older analog systems. Like all our other products, the L Series units are made in the USA and feature machined aluminum housings, user-friendly setup and reliable operation. The ZS-LRLMb kit [or ZS-LRLT kit] makes it easy to put these products right to work on the job. Everything you need is here: transmitter, receiver, mounting hardware, lav mic and connecting cables. Even batteries are included! Check with your Lectrosonics dealer for pricing and availability.

 

Features

  • LR Compact Wireless Receiver
  • LT Portable Beltpack Transmitter
  • M152/5P Omni Lavalier Microphone
  • TA3F to XLRM Cable
  • TA3F to 1/8" TRS Cable
  • Camera Shoe Mount Adapter
  • Zippered Carrying Pouch

 

Available frequency bands:

 

Frequency

Block

A1

470.100 - 537.575 MHz

470, 19, 20

B1

537.600 - 614.374 MHz

21, 22, 23

C1

614.400 - 691.175 MHz

24, 25, 26

 

Included Accessories

  • LR-XX receiver (Frequency band A1, B1 or C1)
  • LT-XX transmitter (Frequency band A1, B1 or C1)
  • M152/5P lavaliere Microphone
  • LRSHOE camera shoe mount for LR Receiver
  • MCSRXLR cable, TA3F to XLRM
  • MCLRTRS cable, TA3F to 1/8" TRS
  • CCMINI zippered pouch

Description

The L Series LR Receiver/LT Beltpack Transmitter and Mic with Accessory Kit from Lectrosonics is a compact digital hybrid wireless receiver and transmitter bundled with a lavalier microphone and accessories for capturing audio. This kit includes the LR portable receiver, LT portable transmitter, M152/5P omnidirectional lavalier microphone, LRSHOE camera shoe mount, one TA3F to XLRM cable, one TA3F to 1/8" TRS cable, and a zippered carrying pouch.

The new L Series units all share a wide tuning range of three standard Lectrosonics blocks, or 67.5 to 76.8 MHz, depending on the specific frequency band, and employ Lectrosonics' patented Digital Hybrid Wireless® technology for compandor-free audio along with compatibility modes for interoperability with older analog systems. Like all our other products, the L Series units are made in the USA and feature machined aluminum housings, user-friendly setup and reliable operation. The ZS-LRLMb kit [or ZS-LRLT kit] makes it easy to put these products right to work on the job. Everything you need is here: transmitter, receiver, mounting hardware, lav mic and connecting cables. Even batteries are included! Check with your Lectrosonics dealer for pricing and availability.

 

Features

  • LR Compact Wireless Receiver
  • LT Portable Beltpack Transmitter
  • M152/5P Omni Lavalier Microphone
  • TA3F to XLRM Cable
  • TA3F to 1/8" TRS Cable
  • Camera Shoe Mount Adapter
  • Zippered Carrying Pouch

 

Available frequency bands:

 

Frequency

Block

A1

470.100 - 537.575 MHz

470, 19, 20

B1

537.600 - 614.374 MHz

21, 22, 23

C1

614.400 - 691.175 MHz

24, 25, 26

 

Included Accessories

  • LR-XX receiver (Frequency band A1, B1 or C1)
  • LT-XX transmitter (Frequency band A1, B1 or C1)
  • M152/5P lavaliere Microphone
  • LRSHOE camera shoe mount for LR Receiver
  • MCSRXLR cable, TA3F to XLRM
  • MCLRTRS cable, TA3F to 1/8" TRS
  • CCMINI zippered pouch

L Series LR Mini Hybrid Portable Wireless Receiver

  • Frequency Selection Steps          Selectable 25 or 100 kHz
  • Receiver Type   Dual conversion, superheterodyne
  • IF Frequency     243.950 MHz and 250.000 kHz
  • Frequency Stability         ± 0.001%
  • Front End Bandwidth     20 MHz @ -3 dB
  • Sensitivity           20 dB SINAD: 1.0 uV (-107 dBm), A weighted
  • 60 dB Quieting: 2.2 uV (-100 dBm), A weighted
  • Squelch Quieting             > 100 dB typical
  • Modulation Acceptance               +/-100 kHz max. varies with selected compatibility mode
  • Image and Spurious Rejection   85 dB
  • Third Order Intercept    0 dBm
  • Diversity Method            SmartDiversity phased antenna combining
  • FM Detector      Digital pulse counting detector
  • RF Spectrum Analyzer   Single and multiple block scanning modes with coarse and fine views of results
  • Antenna Inputs 2x 50 ohms SMA female connectors
  • Audio Output    1x TA3 male (mini XLR) balanced output
  • Audio Output Level        Adjustable -50 to +5 dBu in 1 dB steps, unbalanced output level is 6 dB lower
  • Front Panel Controls      Sealed panel with membrane switches
  • LCD for setup menus and monitoring
  • Audio Test Tone               1 kHz, -50 dBu to +5 dBu output (balanced), 1% THD
  • Transmitter Battery Type Selection         AA alkaline or lithium
  • Timer available for use with alkaline, lithium and HiMH
  • Audio Polarity Selection               Normal or inverted
  • Compatibility Modes     Digital Hybrid (North American and European)
  • Lectrosonics 100, 200 and 300 series
  • Lectrosonics IFB
  • Non-Lectrosonics modes 3, 6 an 7 (contact the factory for details)
  • SmartNR (Noise Reduction)        Off, Normal, Full modes (available in Digital Hybrid mode only)

Audio Performance

  • Frequency Response     32 Hz to 20 kHz (+/- 1 dB) receiver only (see transmitter documentation for overall system response)
  • Total Harmonic Distortion (THD)             
  • Top Panel Features         1 x TA3M audio output jack
  • 2 x SMA antenna jacks 1 x IR (infrared) port
  • Battery / Runtime           4 hours, AA alkaline
  • Operating Temperature               -4 to 32 °F (-20 to +50°C)
  • Dimensions (L x W x H)  3.21 x 2.45 x 0.84" (82 x 62 x 21 mm)
  • Weight 6.54 oz (185.4 g) with two AA lithium batteries

 

LT Beltpack Transmitter

  • Frequency Selection      Steps: Selectable 25 or 100 kHz
  • RF Power Output             50 or 100 mW
  • Pilot Tone           25 to 32 kHz, 5 kHz deviation (Digital Hybrid mode)
  • Frequency Stability         ± 0.002%
  • Deviation            ± 75 kHz max. (Digital Hybrid mode)
  • Spurious Radiation          60 dB below carrier
  • Equivalent Input Noise  -120 dBV (A-weighted)
  • Input Level         Mic: Nominal 2 to 300 mV, before limiting
  • Greater than 1 V maximum, with limiting
  • Instrument: 1 MOhm high level
  • Input Impedance             2 kOhms
  • Input Limiter      DSP controlled, dual envelope "soft" limiter with greater than 30 dB range
  • Gain Control Range        44 dB, digital control
  • Modulation Indicators   Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation
  • LCD bar graph

Audio Performance

  • Frequency Response     90 Hz to 20 kHz (+/-1 dB)
  • Low Frequency Roll-Off -12 dB/octave, 70 Hz
  • THD       0.2% (typical)
  • SNR at Receiver Output SmartNR: Off 103.5 (no limiting) 108.0 (with limiting)
  • Normal: 107.0 (no limiting) 111.5 (with limiting)
  • Full: 108.5 (no limiting) 113.0 (with limiting)

Note: The dual envelope "soft" limiter provides good handling of transients using variable attack and release time constants. Once activated, the limiter compresses 30+ dB of transmitter input range into 4.5 dB of receiver output range, thus reducing the measured figure for SNR without limiting by 4.5 dB

  • Switch Controls Top panel slide switch; programmable as power, mute, talkback or no (off) function
  • Side panel membrane switches with LCD interface for power on/off and all setup and configuration controls
  • Audio Input Jack              1x Switchcraft 5-pin locking (TA5F)
  • Antenna              Galvanized steel, flexible wire
  • Battery 2x AA alkaline, lithium, NiMH rechargeable
  • Battery Life        Duracell Quantum: 4.75 hours
  • Eneloop 2400 mAH NiMH: 6 hours
  • Additional Ports               USB on side panel for firmware updates
  • Dimensions (L x W x H)  2.85 x 2.45 x 0.75" (72 x 62 x 19 mm)
  • Weight 5.9 ounces (169 grams), with alkaline AA batteries

 

MCLRTRS Audio Patch Cord for LR Receiver with 1/8" TRS Camera Input (20")

  • Connector 1       1/8" (3.5 mm) TRS
  • Connector 2       TA3F
  • Length  20" (51 cm)
  • Weight Not listed by manufacturer

 

M152/5P - Omnidirectional Lavalier Microphone

  • Transducer         Electret Condenser
  • Polar Pattern     Omnidirectional
  • Frequency Response     20Hz - 20kHz
  • Dynamic Range (Typical)              Not Specified by Manufacturer
  • Signal-to-Noise Ratio     More than 38dB
  • Maximum Input Sound Level      138dB, (@ 1kHz, 0.5% THD)
  • Power Requirements    Max Operating Voltage: 10V supplied by transmitter
  • Output Impedance         3k (2-6k)
  • Output Connectors         TA5-female for UM Series Transmitters
  • Pad        No
  • Low Frequency Roll-Off No

L Series LR Mini Hybrid Portable Wireless Receiver

Frequency Selection Steps          Selectable 25 or 100 kHz

Receiver Type   Dual conversion, superheterodyne

IF Frequency     243.950 MHz and 250.000 kHz

Frequency Stability         ± 0.001%

Front End Bandwidth     20 MHz @ -3 dB

Sensitivity           20 dB SINAD: 1.0 uV (-107 dBm), A weighted

60 dB Quieting: 2.2 uV (-100 dBm), A weighted

Squelch Quieting             > 100 dB typical

Modulation Acceptance               +/-100 kHz max. varies with selected compatibility mode

Image and Spurious Rejection   85 dB

Third Order Intercept    0 dBm

Diversity Method            SmartDiversity phased antenna combining

FM Detector      Digital pulse counting detector

RF Spectrum Analyzer   Single and multiple block scanning modes with coarse and fine views of results

Antenna Inputs 2x 50 ohms SMA female connectors

Audio Output    1x TA3 male (mini XLR) balanced output

Audio Output Level        Adjustable -50 to +5 dBu in 1 dB steps, unbalanced output level is 6 dB lower

Front Panel Controls      Sealed panel with membrane switches

LCD for setup menus and monitoring

Audio Test Tone               1 kHz, -50 dBu to +5 dBu output (balanced), 1% THD

Transmitter Battery Type Selection         AA alkaline or lithium

Timer available for use with alkaline, lithium and HiMH

Audio Polarity Selection               Normal or inverted

Compatibility Modes     Digital Hybrid (North American and European)

Lectrosonics 100, 200 and 300 series

Lectrosonics IFB

Non-Lectrosonics modes 3, 6 an 7 (contact the factory for details)

SmartNR (Noise Reduction)        Off, Normal, Full modes (available in Digital Hybrid mode only)

Audio Performance

Frequency Response     32 Hz to 20 kHz (+/- 1 dB) receiver only (see transmitter documentation for overall system response)

Total Harmonic Distortion (THD)             

Top Panel Features         1 x TA3M audio output jack

2 x SMA antenna jacks 1 x IR (infrared) port

Battery / Runtime           4 hours, AA alkaline

Operating Temperature               -4 to 32 °F (-20 to +50°C)

Dimensions (L x W x H)  3.21 x 2.45 x 0.84" (82 x 62 x 21 mm)

Weight 6.54 oz (185.4 g) with two AA lithium batteries

 

LT Beltpack Transmitter

Frequency Selection      Steps: Selectable 25 or 100 kHz

RF Power Output             50 or 100 mW

Pilot Tone           25 to 32 kHz, 5 kHz deviation (Digital Hybrid mode)

Frequency Stability         ± 0.002%

Deviation            ± 75 kHz max. (Digital Hybrid mode)

Spurious Radiation          60 dB below carrier

Equivalent Input Noise  -120 dBV (A-weighted)

Input Level         Mic: Nominal 2 to 300 mV, before limiting

Greater than 1 V maximum, with limiting

Instrument: 1 MOhm high level

Input Impedance             2 kOhms

Input Limiter      DSP controlled, dual envelope "soft" limiter with greater than 30 dB range

Gain Control Range        44 dB, digital control

Modulation Indicators   Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation

LCD bar graph

Audio Performance

Frequency Response     90 Hz to 20 kHz (+/-1 dB)

Low Frequency Roll-Off -12 dB/octave, 70 Hz

THD       0.2% (typical)

SNR at Receiver Output SmartNR: Off 103.5 (no limiting) 108.0 (with limiting)

Normal: 107.0 (no limiting) 111.5 (with limiting)

Full: 108.5 (no limiting) 113.0 (with limiting)

 

Note: The dual envelope "soft" limiter provides good handling of transients using variable attack and release time constants. Once activated, the limiter compresses 30+ dB of transmitter input range into 4.5 dB of receiver output range, thus reducing the measured figure for SNR without limiting by 4.5 dB

Switch Controls Top panel slide switch; programmable as power, mute, talkback or no (off) function

Side panel membrane switches with LCD interface for power on/off and all setup and configuration controls

Audio Input Jack              1x Switchcraft 5-pin locking (TA5F)

Antenna              Galvanized steel, flexible wire

Battery 2x AA alkaline, lithium, NiMH rechargeable

Battery Life        Duracell Quantum: 4.75 hours

Eneloop 2400 mAH NiMH: 6 hours

Additional Ports               USB on side panel for firmware updates

Dimensions (L x W x H)  2.85 x 2.45 x 0.75" (72 x 62 x 19 mm)

Weight 5.9 ounces (169 grams), with alkaline AA batteries

 

MCLRTRS Audio Patch Cord for LR Receiver with 1/8" TRS Camera Input (20")

Connector 1       1/8" (3.5 mm) TRS

Connector 2       TA3F

Length  20" (51 cm)

Weight Not listed by manufacturer

 

 

M152/5P - Omnidirectional Lavalier Microphone

Transducer         Electret Condenser

Polar Pattern     Omnidirectional

Frequency Response     20Hz - 20kHz

Dynamic Range (Typical)              Not Specified by Manufacturer

Signal-to-Noise Ratio     More than 38dB

Maximum Input Sound Level      138dB, (@ 1kHz, 0.5% THD)

Power Requirements    Max Operating Voltage: 10V supplied by transmitter

Output Impedance         3k (2-6k)

Output Connectors         TA5-female for UM Series Transmitters

Pad        No

Low Frequency Roll-Off No

END OF tabs.tpl
Viewed